As every house is different and the heating and cooling systems are different, you need to know by yourself what kind of heating/ cooling output you need to keep acceptable temperature inside your house. But because it was there and constantly producing an error, I was desperately trying to feed it something that would pass the check so to speak, without abandoning it altogether earlier. The weather platform only knows the below listed conditions. Links to their Github profiles will be left in the description, so you can support them with a cup of coffee if you want. The weather forecast is delivered by the Norwegian Meteorological Institute and the NRK. This post is a collection of the best weather forecast Lovelace cards for Home Assistant available in the community store (HACS). Simple yet effective. 7.4.1.3 Correction of temperature sensor With the by adding a weather map on home assistant, you will have one more piece of information about your home location that is easily available to you. If the high outside is, say, 75 I dont need to circulate air to keep the different levels even but if its hotter I do. Ive done some template debugging in the Developer Tools and it all seems to work well there, but whatever I try I cant make it work as an automation condition. Is it to have a more stable temperature inside? I tried like this, but it sent to me a notification every minute: Powered by Discourse, best viewed with JavaScript enabled, Help with automated lights depending on weather, Simple automation based on the current weather, put all the conditions only on the FROM, will cause that trigger every change, put all the conditions only on the TO, will cause that never trigger. Very useful to include on interfaces that people display on the wall. Required fields are marked *. Best Time Of the Day! Built with Docusaurus. Are you doing this via the UI or directly in YAML? Nice inspiration for more complex future setup, thanks! The only hint of the Automation Editors Test function is this brief mention in the first paragraph: If I use this template as Automation / Conditions it doesnt test when created. Cooling would flip this upside down. Your email address will not be published. You can see that in dev tools > state We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. Home Assistant Openweathermap Instructions on how to integrate OpenWeatherMap within Home Assistant. Add Weather Radar to Home Assistant UI, Step 3. As a consequence, the seasoned users you mentioned, avoided it entirely and used a text editor to compose their automations (like Visual Studio Code with some plugins to guard against syntax errors). ition changes to". The action taken on card double-tap. That one works best if you pair it with a capable weather alert integration, which would ideally be local to your location. Implement update () or async_update () to fetch data. The trigger will work if the state changes from any of the states listed under from: to any of the states listed under to:. A trending up/down near that threshold allows me to prematurely turn on heating/cooling if so desired. Oh thanks for the answers. The delay depends on insulation and mass (theres some term for it). I haven't parsed weather with templates before. Dont forget to add an automation as well, which would send you a notification for example, on a announce it to your smart speaker. Icons are neatly animated and look great on a wall mounted tablet. If forecast temperature is > Y then turn off heating and turn on cooling It pulls the raw data from NOAA and converts it over to the format used by the DarkSky API. My solution to this problem was to create an automation which can read the forecast and decide whether or not the immersion should switch on at all, based on the cloud forecast for the daytime hours of the following day. Ive also thought about writing a little tutorial about my prediction controlled system and some scientific studies behind predictive heat/ cool controlling in domestic housing. If I use this template as Automation / Actions / Condition I cant test it (no test button), but when I trigger the automation, it tests the template condition correctly first and only performs Action if it returns true. If anyone has any experience or links to share Id be super grateful. Nope, not silly at all. It is capable of showing important weather information in a very tiny space, making it very useful for mobile phones of wall mounted dashboards. The visibility unit; km or mi. However, an hourly electricity pricing would be a reason to heat/cool in advance - to reduce energy usage when price is high. I need a predictive system as the storage heaters only charge up at certain times of night & day. Required if native_visibility is set. Click the Add Card button in the bottom right corner and select from the card picker. That syntax is an error caused by opening in UI. All I really want to do is have it poll the weather service for the max temperature predicted. This website uses cookies to improve your experience while you navigate through the website. The "weather" group is the important one. I have good insulation. If I define the exact same Condition as first action in the Actions section instead , there it gets tested correctly and further Actions stopped if it tests false. The system is hard to create, and each building is unique, so generalizing is even harder. The weather forecast is delivered by the Norwegian Meteorological Institute and the NRK. This. Forecast data needs to follow the same unit of measurement as defined for properties where applicable. But where in the docs i can see a text formatting like yours? Or are/ were you just looking for ready made complex blueprint? Legal Information Deutscher Wetterdienst (DWD) is not affiliated in any way with this project. Ive tried this and although it reports an error when I test on the Automation dialog, just like all condition based on templates, it works properly: In my case the index 0 on forecast is today, so Ive used 1 for tomorrow. Light flash triggered by weather forecast help request jocnnor (Jim O'Connor) November 26, 2020, 6:49am #2 Open up developer tools, and click the 'states' tab. In the code examples below Ive created 24 hourly cloud forecast sensors, hourly)[0].clouds is the current hour hourly)[0].clouds is the forecast for 1 hours time and so on. - #14 by Tom7320, I will give that a try, if I succeed I come back on this. However Home Assistant has a sensor platform called Rest which can read in Json formatted data and https://openweathermap.org/api can provide forecast data in Json form. It correctly returns true: If I try to use the same template in the Automation Condition type Template: I receive the error: Ive been thinking of this and will probably take a stab at it - thats why Ive tried to get to the bottom of it and understand whats going on. This was fun. Remote 3G/4G MySensors LoRa Gateway V2 with IOT SIM. Matter, SmartHomeScene 2023 Itd be good to know when Met.no makes updates to the forecast and trigger it at the time closest to around 3/4am which is the earliest time the predictive heating came on during the winter months. Its what the existing conditional card is based on. The Weather entity was introduced in Home Assistant 0.32, and it's used by. Next the data needs to be extracted and individual sensors created. Then you might decide to turn on the sauna or the fireplace, or cook some food - further complicating the system. Ive been thinking about this topic, and it appears to be pretty complex. Although most of the times peak is around noon which would be fine. The met platform uses the Met.no web service as a source for meteorological data for your location. Nice. A bonus here would be when the peak temperature is. This card does not need to be downloaded, its part of the default Home Assistant configuration. We also use third-party cookies that help us analyze and understand how you use this website. To use the Forecast.Solar integration, it will need some information about your solar panel system: latitude, longitude, declination, azimuth and total modules power. Includes a native Home Assistant Weather Entity and a variety of weather sensors. Home Assistant How To - get most out of AccuWeather integration Share Watch on Setting up Weatherflow & Google Assistant Integration | Quick Tech Tip Watch on Get Google's Hidden Weather App on Your Home Screen Watch on How is weather data collected? So your trigger could be when any of those states change and the conditions would be ORs: And like @pedolsky mentioned, use the dev tools to determine what state values are since you need to be literal when testing for them. I cant understand how to make a trigger based on the changing of the weather forecast. If the forecast is above X then turn on cooling, if the forecast is below Y then turn on heating. Zigbee elseif forecast temperatuer is < Z then turn off cooing and turn on heating. It supports most of the core weather integrations as well as custom integrations like MeteoAlarm (EU), Mto-France (France), DWD (Germany), WeatherAlerts (USA) and more. Heres something that might be useful once its included in a stable version. This card displays information in three distinct rows: The current weather icon, the current temperature and title, The details about the current weather, The X day forecast or hourly forecast. While most thermostats are on/off at a threshold. 1 Like Phantomski (David Dosoudil) June 15, 2022, 7:09pm #13 How to add an animated Weather Radar on Home Assistant? With or without double quotes, Ive tried various brackets at various places, it never works. Forecast data should either be daily or hourly. Im using met.no that is already integrated on HA. Privacy Policy, HOME ASSISTANT Conditions are optional and will prevent the automation from running unless all conditions are satisfied. What if in the trigger i set like this: Will it work if any of the two state become true? Seems like I could use that meteoalarm-card to provide more info on the initial view, at least. I have patio stones outside the patio door. It is also quite complicated for some specific but simple tasks and so source of endless frustrations for me, usually due to a trivial stuff that takes ages to solve, despite brilliant documentation and active community. Ive added simple-weather-card to my list for my future mobile view redesign, and I think I may give the meteoalarm-card a try for weather alerts on my tablet/kiosk view. By default, Home Assistant is configured to populate the Lovelace GUI for you automatically, but at some point, you will want to take control and set it up just how you want it. Thats something you would do with a template but the State Conditions attribute option doesnt support templates. I completely forgot the or statement. -35C. However to do it properly, I must figure out at least the natural lag of my house. The Meteoalarm Card is a powerful yet simple custom card to show meteorological warnings card in Home Assistant. It is for adjusting the heating as the outside temperature changes. Just maybe, condition is a reserved word in the automation system. Likewise if a spot rain shower happens, the temp drops way below some weather station miles away where it can be sunny. Theme variables include: // If your state is not above, use this format. and then test the state of this new sensor: Its just digging deeper into attribute list directly in the condition type template that doesnt work. Select the Automation: Trigger service, select your automation, then disable the Skip Condition option before clicking the Call Service button. In order to use the API you need to register with https://openweathermap.org/api. I have had no issues for a long time, not sure if it is related to the Feb. update, today my main forecast shows unavailable but many of the sub entities are showing with data. Without the main entity all my templates are failing. If you format the list as shown above, like this: and so on, it will trigger when the state changes from anything in that list to anything. I can empathize with your feeling of theres goes time Ill never get back. I use the weather.17_xxxxx to create templates to get the current temperature, high and low temp, etc. I'm using another weather integration, so I don't know what attributes weather.casa has. For the longest time, the Automation Editor felt like it was last on every developers to-do list. SmartHomeScene.comis a participant in theAmazon Services LLC Associates Program & AliExpress Portals Affiliate Program.We may earn a small commission on qualifying purchases from these websites, which incurs no additional cost to you.Consider buying us a coffee or supporting us on patreon.SmartHomeScene 2023 All rights reserved Privacy Policy | Contact | Support, Do more card categories like this I like it. Home-Assistant-based-Farm-Automation-and-Monitoring. Ive tinkered my own 2 story house heating/ cooling with two air heatpumps, many room temperature sensors and weather prediction to conserve energy with predictive automations. This created a slight issue because I also have solar panels for hot water and Im now heating water at night using electricity. We are compensated for referring traffic and business to these websites, incurring no additional cost to you as a consumer.SmartHomeScene 2023 All rights reservedPrivacy Policy | Contact Us | Support, SITE LINKS It had limited functionality and got very few enhancements. #--------------------------Weather maps-----------------------------------------------, //api.sat24.com/animated/GB/rainTMC/3/GMT%20Standard%20Time/441208, //api.sat24.com/animated/GB/infraPolair/3/GMT%20Standard%20Time/4239410, //demo.home-assistant.io/stub_config/kitchen.png, //www.ventusky.com/?l=wind-10m#settings-main. Required if native_wind_speed is set. manually: From the configuration menu select: Devices & Services. All consumption contributes to heating. Properties have to follow the units mentioned on the respective unit of measurement in the table. Have tomorrow's forecast delivered to you automatically at a time you specify using Home Assistant. It changes by the hour. The lying Test button being one of them. There are multiple ways to skin this cat, and whats been proposed is 100% legitimate. I will leave some configuration examples showcasing the cards as well as direct HACS links for easy download. The weather platforms gather meteorological information from web services and display the conditions and other details about the weather at the given location.